Dual Coated Post Anchors

Dual Coated
Post Anchors

 

 

 

DPS Drive-In Fence Post Spike

PowaPost LogoDual Coated corrosion protection LogoDrive-In Post Spikes

Designed to make the erection of fencing, gazebos, pergolas and other garden structures quick and easy, the PowaPost® range of fence post spikes offer strong anchorage for timber posts and are manufactured from welded heavy duty mild steel with dual coated corrosion protection for longer life and a longer lasting attractive finish.

FGT/50 Fibreglass Self Adhesive TapeDual Coated Corrosion Protection

After manufacture the steel is first electro zinc plated and then a moisture resistant powder coating is applied, resulting in a superior durable protection against rust.

Benefits of using PowaPost® Post Supports

  • PowaPost® is cost effective – uses shorter posts and no concrete required.
  • PowaPost® saves time and effort – no digging and quick, easy installation.
  • PowaPost® lasts longer – dual coated rust protection.
  • PowaPost® design – protects timber from water, fungal and insect damage.

Installation

Suitable for most ground conditions, simply drive the spike into the ground using the PowaPost® driving tool. The four fin spike is designed for easy insertion with minimal twisting, and secure anchorage into the ground. Choice of Twin Bolt or EasyGrip design for a strong connection.

The EasyGrip design holds the timber post in a tight wedge without the need for fixings, whereas the Twin Bolt arrangement mechanically tightens around the post allowing easy removal of damaged or rotten posts.

Code Size Spike Length Pack Qty.
DPS/50/600* 50x50mm 450mm 8
DPS/75/600* 75x75mm 450mm 8
DPS/75/750* 75x75mm 600mm 8
DPS/75/900* 75x75mm 750mm 8
DPS/100/750* 100x100mm 600mm 8
DPS/100/900* 100x100mm 750mm 8

* Product code refers to overall length of component, i.e. 450mm spike plus 150mm shoe = 600 code.

Hot Dipped Galvanised post supports are also available.

How to order

  • For Twin Bolt order code DPS/width/overall length including shoe e.g. DPS/75/750 (600spike + shoe)
  • For easyGrip prefix code with EASY/
  • For Galv finish, prefix with G/
Download datasheet

PS1 Bolt Down Post Shoe

PowaPost LogoDual Coated corrosion protection LogoThe Powapost® Bolt Down Shoe is designed for use when posts are required to be installed on an existing hard surface such as a concrete or wooden base.

Ideal for use when building carports, pergolas, fencing and decking.

Available in standard Twin Bolt and easyGrip design (prefix order code with EASY, e.g. EASYPS1/75)

Installation

Before drilling, use the shoe as a template to mark drill hole positions. Then secure the shoe to the surface using four bolts suitable for the job. It is important to follow the manufacturer’s guidelines when selecting the appropriate bolt fixing.

Code Timber Size Pack Qty
PS1/50 50x50mm 6
PS1/60 60x60mm 6
PS1/75 75x75mm 6
PS1/90 90x90mm 6
PS1/100 100x100mm 6

 

Download datasheet

PS1 Bolt Down Post Shoe (EasyGrip)

PowaPost LogoDual Coated corrosion protection LogoThe Powapost® EasyGrip Bolt Down Shoe features a wedge type grip which allows quick and easy installation without the need for tightening bolts.

Code Post Size Pack Qty
PS1/50 50x50mm 6
PS1/75 75x75mm 6
PS1/100 100x100mm 6
PS1/150 150x150mm 6

 

Download datasheet

FPS1 Flush Fit Bolt Down Shoe

PowaPost LogoDual Coated corrosion protection LogoThe Flush Fit Bolt Down is particularly suitable for applications where a post requires fitting against a flush surface or mounted on top of an existing wall, or in line with the edge of a patio or timberdeck.

Code Post Size Pack Qty
FPS1/50 50x50mm 6
FPS1/75* 75x75mm 6
FPS1/100* 100x100mm 6

*Also available in Hot Dipped Galvanised finish, (prefix order code with G, e.g. G/FPS1/75)

Download datasheet

PS2 Concrete-In Post Shoe

PowaPost LogoDual Coated corrosion protection LogoDesigned for use when soil conditions are unsuitable for drive-in spikes.

Installation

Simply set the shoe into a 450mm cube of concrete so that the base plate sits on the surface, checking alignment during installation. The post should only be inserted once the concrete has cured.

Code Timber Size Pack Qty
PS2/75 75x75mm 6
PS2/100 100x100mm 6

 

Download datasheet

RS Repair Spike

PowaPost LogoDual Coated corrosion protection LogoThe Powapost repair spike is a sturdy welded shoe which provides an easy solution to broken or rotted timber posts that have been previously set into concrete.

Perfect for repairing storm damaged fencing, the repair spike is installed quickly, eliminating the need to remove the existing concrete and without the need for digging or additional concreting.

Installation

Saw off the old timber post at ground level and hammer the Powapost Repair Spike fully down, in-between the corner of the timber and the existing concrete, using a Powapost Driving Tool to aid insertion and protect the metal shoe.

If the concrete is not sound enough to secure the spike, it will be necessary to re-fit the post in an alternative position using the Powapost DPS Fence Spike. Once the Repair spike is secured in position attach either the old post if usable, or a new fence post.

Code Timber Size Pack Qty
RS/75 75x75mm 6
RS/100 100x100mm 6

 

Download datasheet

PEX Post Extender

PowaPost LogoDual Coated corrosion protection LogoThe Powapost Post Extender is a single piece welded box section that enables easy extension of any 75 or 100mm timber post, allowing easy addition of decorative panels and trellis.

Installation

The easyGrip design allows quick and easy fixing without the need for any additional fixings.

Simply drive the Post Extender onto the top of the existing post using the Powapost driving tool to avoid damage to the metal sleeve. Location tabs inside the component help provide accurate positioning.

Once secured, drive the new timber post into the top of the Post Extender and use Powapost Panel Clips to secure trellis or decorative panels.

Code Timber Size Pack Qty
PEX/75 75x75mm 6
PEX/100 100x100mm 6

Also available in Hot Dipped Galvanised finish, order code G/PEX/size.

Download datasheet

PS3 Post Support

PowaPost LogoDual Coated corrosion protection LogoHeavy duty welded bracket, designed to be set into concrete.

To secure garden sleepers, posts for gazebos, carports and shelters.

Not suitable for fencing.

Code Timber Size Pack Qty
PS3 75x75mm 12

 

Download datasheet