A galvanised landscaping wire gabion manufactured from 3mm diameter 50x50mm mesh, hot dipped galvanised for superior durability and corrosion protection.
Use PowaPost® Cube indoors and out to create:
Terracing & Landscaping
Ponds & Water Features
Raised Beds & Walling
Garden & Patio Seating
Tables & Benches
The PowaPost® Cube is a quick and easy to use building block suitable for many garden landscaping applications which is also ideal for creating stylish features both indoors and out.
The PowaPost® Cube should be ÿlled with decorative rocks or cobble for landscaping but for more creative and artistic applications why not use logs, plastic bottles, glass jars or painted rocks.
Available in four standard sizes, packed 1 cube per inner pack, including all fixings and assembly instructions.
|Code||Timber Size||Outer Pack Qty|
Manufactured from galvanised 40x3mm mild steel, powder coated after fabrication for superior dual coated corrosion protection.
Available in 4 angle sizes:
45x45mm, 90x45mm, 90x90mm and as a 180mm flat plate connector.
Timber to timber joist hanger to support 47mm wide joists from 100 to 150mm in depth.
Manufactured from 2mm thick galvanised steel, powder coated after fabrication for superior dual coated corrosion protection.
Manufactured from 2.5mm thick galvanised steel, powder coated after fabrication for superior dual coated corrosion protection.
Manufactured from 2.0mm thick galvanised steel, powder coated after fabrication for superior dual coated corrosion protection.
A multi-purpose connector designed to be bent on site to suit many timber to timber jointing applications.
Manufactured from 1.5mm galvanised steel, powder coated after fabrication for superior dual coated corrosion protection.
A strong slotted bracket, manufactured from 3mm thick galvanised steel. Powder coated for superior dual coated corrosion protection.
Galvanised steel ground staples used to secure weed/ground control fabric to the ground.
Supplied in retail polybags (10 per pack) or bulk packs of 50.
A hidden galvanised xing that provides quick easy installation of deck boards.
1. After securing the rst deck board*, carefully tap a decking clip to the edge of the xed board after the rst joint position.
2. Nail or screw the bracket to the joist
3. Repeat at each joist position along the deck board.
4. Tap the next deck board onto the pre-xed brackets using a sacricial timber or rubber mallet to protect the edge of the timber.
5. Repeat for each deck board ensuring that the nail board is secured.
A versatile reinforced bracket for use in 90 degree connections allowing for use of nails, screws and / or bolts and coach screws.
Manufactured from 2.5mm thick galvanised steel to BS EN 10346:2009 + G275.
Stainless steel grade 304 austenitic to BS EN 10088-2 Grade 1.4301 available from stock in all sizes.Other downloads
Suitable for timber to timber, timber to steel and timber to masonry applications.
Lightweight hanger manufactured from 0.9mm thick galvanised steel, for timber to timber application.
Produced from galvanised steel to BS EN 10346:2009 DX51D + G275 as standard, or stainless steel available to order.
Galvanised hangers must be fixed using 30 x 3.75mm sheradised square twisted nails in all pre-punched holes.
|Product Reference||S.W.L.(KN)**||Width (W)||Side (S)||Leg(L)||Box Qty.|
A lightweight galvanised joist hanger providing a strong connection and quick and easy installation.
Designed with wider 50mm strap legs to enhance performance with increased nail spacing.
Suitable for joist depths of 150 to 250mm. Leg length can be adjusted by wrapping over to suit joist height. Also suitable for face fixing.
Ideal for trimming around ceiling hatches and other similar light duty applications.
Manufactured from 0.9mm thick galvanised steel.
Suitable for timber depth up to 100mm.
Manufactured from 2mm thick galvanised steel. Bolt hole to suit M12 fixing, nail holes 4mm diameter. Produced from galvanised steel to BS EN 10346:2009 + G275 as standard.
Use 30 x 3.75mm sheradised square twisted nails in all pre-punched holes, together with bolts in Multi Truss Hanger range where required. Stainless steel hangers are available to order.
Bearing surface on all multi-truss hangers is 75mm.Other downloads
Multi - purpose fixing that can be used for connecting roof timbers, joist trimmings, studding and general timber frame construction. Slotted design allows bending on site to suit all configurations.
Manufactured from 1.2mm thick galvanised steel.
Safe working load 3.5kN per pair when using BPC Sheradised Square Twisted Nails 30x3.75mm.Other downloads
A versatile range of 2.5mm thick galvanised brackets and plates, suitable for nail or screw fixing, used to strengthen timber joints.
AP/664 also available in stainless steel material from stock.Other downloads
A retail box containing 4 sturdy hot dipped galvanised brackets and all necessary fixings.
Use these 60x60x200mm long multi-purpose brackets for creating raised beds with timber boards of any thickness or for strengthening corners in general timber construction.
A heavy duty connector used to secure 38 and 50mm deck joists to posts.
A galvanised bracket designed to connect vertical posts to joists.
Fix in pairs.
A bolt down post shoe used for installing deck posts onto an existing concrete base
A sturdy 3mm thick shoe designed to fix deck posts into new concrete.