Suitable for most ground conditions, this post spike gives the ideal anchor for any common timber post. Drive the spike into the ground using the Powapost™ driving in tool, the four fin spike is designed to help insertion and minimise twisting.

Suitable for most ground conditions, this post spike gives the ideal anchor for any common timber post. Drive the spike into the ground using the Powapost™ driving in tool, the four fin spike is designed to help insertion and minimise twisting.

The EasyGrip design holds the timber post in a tight wedge grip without the need for fixings.

This robust universal tool is designed to aid installation of Post Spikes, to protect the shoe whilst hammering into the ground. The PowaPost® Driving Tool should always be used when installing Post Spikes.

The PowaPost® Bolt Down Shoe is designed for use when posts are required to be installed on an existing hard surface such as a concrete or wooden base. Ideal for use when building carports, pergolas, fencing and decking.

The PowaPost® Bolt Down Shoe is designed for use when posts are required to be installed on an existing hard surface such as a concrete or wooden base. Hot dip galvanised after fabrication for superior corosionresistance. Ideally suited to costal areas.

The Flush Fit Bolt Down is particularly suitable for applications where a post requires fitting against a flush surface or mounted on top of an existing wall, or in line with the edge of a patio or timber deck.

The PowaPost® EasyGrip Bolt Down Shoe features a wedge type grip which allows quick and easy installation without the need for tightening bolts

Designed for use when soil conditions are unsuitable for drive-in spikes.

The PowaPost® repair spike is a sturdy welded shoe which provides an easy solution to broken or rotted timber posts that have been previously set into concrete. Perfect for repairing storm damaged fencing, the repair spike is installed quickly, eliminating the need to remove the existing concrete and without the need for digging or additional concreting.

The PowaPost® Post Extender is a single piece welded box section 180mm long that enables easy extension of any 75 or 100mm timber post, allowing easy addition of decorative panels and trellis.

Galvanised bracket (70 x 70 x 180mm long) used to extend timber posts. Use 2 brackets to extend 70 x 70mm to 150 x 150mm timber. Use 4 brackets for anything larger.