Call us on 01924 364794 | sales@bpcfixings.com | technical@bpcfixings.com

SMH Joist Hanger Type R

The return type hanger is designed for similar application to the Type S but with the advantage of a return flange (25mm as standard ) which greatly increases lateral support by giving the top flange additional resistance to pull out. We would recommend the use of TYPE R return flange hangers wherever possible for all timber to brick applications. As standard the return hanger is manufactured to suit 100mm blockwork, however any length of top flange is available to order.

Downloads

Size Table
Depth (Actual) mm	Width of Hanger (mm)
Depth (Actual) mm	38	44	47	50	63	75
100	38X100	44X100	47X100	50X100	63X100	75X100
125	38X125	44X125	47X125	50X125	63X125	75X125
150 (140)	38X150	44X150	47X150	50X150	63X150	75X150
175 (165)	38X175	44X175	47X175	50X175	63X175	75X175
200 (190)	38X200	44X200	47X200	50X200	63X200	75X200
225 (215)	38X225	44X225	47X225	50X225	63X225	75X225
250 (240)	38X250	44X250	47X250	50X250	63X250	75X250

Size Table
Depth (Actual) mm	Width of Hanger (mm)
Depth (Actual) mm	88	91	100	125	150
100	88X100	91X100	100X100	–	–
125	88X125	91X125	100X125	125X125	–
150 (140)	88X150	91X150	100X150	125X150	150X150
175 (165)	88X175	91X175	100X175	125X175	150X175
200 (190)	88X200	91X200	100X200	125X200	150X200
225 (215)	88X225	91X225	100X225	125X225	150X225
250 (240)	88X250	91X250	100X250	125X250	150X250

Order Code = SMH / R / width x depth i.e. SMH /R / 50×200 (100 return)
Width (W)	38, 44, 47, 50, 63, 75, 88, 91, 100, 125 & 150mm
Depth (D)	100, 125, 150, 175, 200, 225 & 250mm*
Bearing Surface (B)	75mm

*Please note: As standard all hangers 150mm deep and above are manufactured 10mm less to allow for regularised timber and to ensure that joist levels are maintained.

A range of Heavy Duty Joist Hangers designed for building into brickwork or blockwork. As standard all hangers are manufactured from 2.0mm thick pregalvanised steel to BS EN 10346. Wide top flange design offers increased loading capacity on masonry with a minimum crushing strength of 3.5N/mm² and above. All hangers feature 75mm bearing surface and pre-punched side gussets to allow nail fixing into timber joists with 30 x 3.75mm Sheradised square twist nails.

Hangers per Box
Timber Depth	Timber Width (mm)
Timber Depth	38	44	47	50	63	75	88	91	100	125	150
100mm	50	40	40	40	40	40	30	30	30	–	–
125mm	45	40	40	40	40	30	30	30	20	15	–
150mm	40	40	40	40	40	25	25	25	20	15	15
175mm	30	30	30	30	30	20	20	20	20	15	10
200mm	25	25	25	25	25	20	20	20	15	10	10
225mm	25	25	25	25	25	20	20	20	15	10	10
250mm	25	25	25	25	20	15	15	15	15	10	10

Please Note The Type ‘R’ Return Hanger is not a Restraint Hanger. Restraint Hangers are specials/ manufactured to order.

SMH Joist Hanger Type R

Downloads

BPC