Metalwork Archives - BPC Fixings

SMH Joist Hanger Type S (SJH)

The standard hanger is designed for building into brickwork or blockwork.

SMH Joist Hanger Type R (RJH)

The return type hanger is designed for similar application to the Type S but with the advantage of a return flange (25mm as standard ) which greatly increases lateral support by giving the top flange additional resistance to pull out. We would recommend the use of TYPE R return flange hangers wherever possible for all timber to brick applications. As standard the return hanger is manufactured to suit 100mm blockwork, however any length of top flange is available to order.

SMH Joist Hanger Type D (STJH)

The straddle type joist hanger is used when timber joist positions are directly opposite each other on either side of a wall or beam. As standard the straddle hanger is manufactured to suit 100mm blockwork, however any width is available to order.

H Horizontal (Heavy Duty) Restraint Straps (HDMH)

Heavy duty restraint straps (galvanised edge coated) are suitable for horizontal restraint applications such as tying timber roofs and floors into masonry walls. These multi-holed straps are supplied in 100mm increments with 6mm holes at 25mm offset centres. Available straight, bent or twisted or in combinations as required in galvanised or stainless steel.

HX Engineered Restraint Straps

HX horizontal restraint straps are engineered to provide the performance of our traditional ‘H’ strap. Manufactured from galvanised mild steel to BS EN 10346:2015. The HX restraint strap is a thin profile (1.5mm thick) strap suitable for horizontal restraint applications such as tying timber roofs and floors into masonry walls.

V Vertical (Light Duty) Restraint Straps (LDMH)

Light duty restraint straps can be used for vertical restraint applications, such as holding down wall plates to masonry. These multi-holed straps are supplied in 100mm increments with 6mm holes at 25mm offset centres. Available straight, bent or twisted or in combinations as required in galvanised or stainless steel.

VX Engineered Restraint Straps

VX vertical restraint straps are engineered to provide the performance of our traditional ‘V’ strap. Manufactured from galvanised mild steel to BS EN 10346:2015. The VX restraint strap is a thin profile (1.2mm thick) strap suitable for vertical restraint applications such as tying wall plates to masonry walls.

A190 Light Duty Hanger (Short Leg) (V81-SL)

Short Leg Timber to Timber Hanger. A quick and safe method of joist trimming for light and medium applications such as supporting floor joists, trimming stair wells. They have increased hole centres to spread load over greater area.

A270 Light Duty Hanger (Standard Leg) (V81)

Standard Timber to Timber Hangers. A quick and safe method of joist trimming for light, medium and heavy applications such as supporting floor joists, trimming stair wells, and underslung joists. They have increased hole centres to spread load over greater area.

B340 Medium Duty Hanger (Standard Leg)

A medium duty hanger that is suitable for joist depths of up to 250mm.

B460 Medium Duty Hanger (Long Leg) (V81-Long)

Long Leg Timber to Timber Hangers. Manufactured from 1.2mm thick pre-galvanised steel with 50mm wide legs, suitable for solid joist or I-Beam applications, either face fixed or wrapped over supporting joists.

B610 Medium Duty Hanger (Long Leg)

Long Leg Timber to Timber Hangers. Manufactured from 1.5mm thick pre-galvanised steel with 50mm wide legs, suitable for solid joist or I-Beam applications, either face fixed or wrapped over supporting joists.

MINI Mini Hangers (V82)

Support of short span joists, trap hatches and in-fill timbers in roof space. Designed for fast and economical light duty applications.

TC Truss Clips

Attaches trusses and rafters to wall plates to provide wind restraint. Avoids skew nailing damage and provides positive resistance to wind forces. Safe working load 2.38kN uplift.

GTS Girder Truss Shoe (V83)

Used to attach and support roof truss from girder truss. Higher qualified load performance and increased hole centres to spread load over a greater area. Manufactured from 1.2mm thick material.

MTS Mono Truss Shoe

Mono truss shoe is designed for the support of a short span, mono or in-fill truss where the lower weight loadings are required over a standard girder truss shoe.

GS Glide Shoe

This glide shoe is designed to allow horizontal movement at truss bearing without affecting the overall stability of the truss whilst continuing to provide resistance to lateral and uplift forces. Secures raised tie or scissor trusses to the wall plate.

NP Hand Nail Plates (V55)

A nail plate system for manual use which enables the construction of timber structures on site to strengthen joints for non-structural applications. Automated production ensures uniform hole positions.

MTH/240 Multi-Truss Hangers (MH)

Supports multiple trusses from primary girder, purlin to beam connections and main trimmer joists. Used for joining timber to timber, masonry or concrete. For higher overall load performance.

GC-NP Hand Nail Plates (Anthracite Grey)

A nail plate system for manual use which enables the construction of timber structures on site to strengthen joints for non-structural applications. Automated production ensures uniform hole positions.

GC-MTH/240 Multi-Truss Hanger (Anthracite Grey)

Supports multiple trusses from primary girder, purlin to beam connections and main trimmer joists. Used for joining timber to timber, masonry or concrete. For higher overall load performance.

MTH/340 Multi-Truss Hanger

For use in heavy duty applications such as multiple truss units, main trimmer joists, purlin to beam connections or similar situations where unusually heavy loads occur.

GC-MTH/340 Multi-Truss Hanger (Anthracite Grey)

For use in heavy duty applications such as multiple truss units, main trimmer joists, purlin to beam connections or similar situations where unusually heavy loads occur.

MTH/380 Multi-Truss Hanger & MTH/CF/380 concealed flange

For use in heavy duty applications such as multiple truss units, main trimmer joists, purlin to beam connections or similar situations where unusually heavy loads occur. Also available as MTH/CF/380 with face plates folded inwards for concealed fixings.

GC-MTH/380 Multi-Truss Hanger (Anthracite Grey) & GC-MTH/CF/380 concealed flange (Anthracite Grey)

For use in heavy duty applications such as multiple truss units, main trimmer joists, purlin to beam connections or similar situations where unusually heavy loads occur. Also available as GC-MTH/CF/380 with face plates folded inwards for concealed fixings.

MTH/500 Multi-Truss Hanger & MTH/CF/500 concealed flange

For use in heavy duty applications such as multiple truss units, main trimmer joists, purlin to beam connections or similar situations where unusually heavy loads occur. Also available as MTH/CF/500 with faces plates folded inwards for concealed fixings

GC-MTH/500 Multi-Truss Hanger (Anthracite Grey) & GC-MTH/CF/500 concealed flange (Anthracite Grey)

For use in heavy duty applications such as multiple truss units, main trimmer joists, purlin to beam connections or similar situations where unusually heavy loads occur. Also available as GC-MTH/CF/500 with faces plates folded inwards for concealed fixings.

MTH/620 Multi-Truss Hanger & concealed flange

For use in heavy duty applications such as multiple truss units, main trimmer joists, purlin to beam connections or similar situations where unusually heavy loads occur. Also available as MTH/CF/620 with faces plates folded inwards for concealed fixings.

GC-MTH/620 Multi-Truss Hanger (Anthracite Grey) & GC-MTH/CF/620 concealed flange (Anthracite Grey)

For use in heavy duty applications such as multiple truss units, main trimmer joists, purlin to beam connections or similar situations where unusually heavy loads occur. Also available as GC-MTH/CF/620 with faces plates folded inwards for concealed fixings.

AP Angle Plate

A multi-purpose fixing angle plate for general site applications, ie for connecting timber joists to timber purlins.

GC-AP Angle Plate (Anthracite Grey)

An anthracite grey multi-purpose fixing angle plate for general site applications, ie for connecting timber joists to timber purlins.

NPAB Nail Plate Angle

A light duty 0.9mm thick perforated angle with reinforced holes.

AB Angle Brackets

A versatile range of brackets for use in 90 degree connections allowing for use of nails, screws and / or bolts and coach screws. AB Angle Brackets have a reinforced rib.

GC-AB Angle Brackets Reinforced rib (Anthracite Grey)

A versatile range of anthracite grey brackets for use in 90 degree connections allowing for use of nails, screws and / or bolts and coach screws. GC-AB Angle Brackets have a reinforced rib.

ABL Angle Brackets

A versatile range of brackets for use in 90 degree connections allowing for use of nails, screws and / or bolts and coach screws. ABL Angle Brackets have no rib.

RS50 Repair Strap

Made from heavy-duty 2.3 mm thick galvanized steel, these 50mm wide straps offer a robust connection for bolts and/or nails. They are suitable for timber-to-timber, timber-to-masonry, and timber-to-steel general repairs. Available in 50mm increments.

AB50 Heavy Duty Angle Brackets

Manufactured from heavy duty 2.3 mm thick galvanised steel, these 50mm wide brackets and plates provide a strong connection allowing for the use of bolts, nails, screws. Suitable for timber to timber, timber to masonry and timber to steel applications.

FCP Flat Connector Plates

A range of pre-punched flat connectors suitable for many timber to timber, masonry or steel applications. Manufactured from 2.5mm thick galvanised steel as standard. Stainless steel also available to order.

GC-FCP Flat Connector Plates (Anthracite Grey)

A range of anthracite grey, pre-punched flat connectors suitable for many timber to timber, masonry or steel applications. Manufactured from 2.5mm thick galvanised steel and powder-coated after fabrication.

BB Balustrade Bracket

Our balustrade bracket is designed for external use, offering a durable and stylish solution for securely fixing balustrades in gardens and outdoor spaces.

LB Angle Bracket

Angle brackets for non structural DIY and professional fixing applications. Manufactured from pre-galvanised mild steel. Produced from galvanised steel to BS EN 10346 + G275 as standard.

CB Light Duty Corner Bracket

A range of multi-purpose brackets suitable for many DIY and professional fixing applications. Manufactured from pre-galvanised mild steel.

AAB Adjustable Angle Bracket

A galvanised 90 degree connector available in a range of sizes with two slots and multi-hole pattern designed for easy adjustment.

T150 & L150 Brackets

Galvanised brackets used for connecting timbers to make a ‘T’ or ‘L’ shaped joint. Available from stock in the following sizes, additional sizing options are available to order. Thickness 2mm.

BRA Light Duty Angle Braces

Light duty angle brackets suitable for many DIY and professional fixing applications. Manufactured from pre-galvanised mild steel.

CSP Corner Stretcher Plate

Corner stretcher plate for DIY and professional fixing applications. Manufactured from pre-galvanised mild steel.

CPL Corner Plate

Corner plate for DIY and professional fixing applications. Manufactured from pre-galvanised mild steel.

MP Mending Plates

Mending plates for DIY and professional fixing applications. Manufactured from pre-galvanised mild steel.

HJS Herringbone Joist Strut (V59)

Lateral support between timber floor joists. Giving superior bracing over unreliable, slow and costly timber noggins.

FA Framing Anchor (V52)

Multipurpose fixing that can be used for connecting roof timbers, joist trimmings, studding and general timber frame construction. Slotted design allows bending on site to suit all configurations. Manufactured from 1.2mm thick galvanised steel.

HDA Holding Down Angles

A heavy duty general purpose angle plate manufactured from 2.0mm thick galvanised steel to BS EN 10346:2009 +G275.

GC-HDA Holding Down Angles (Anthracite Grey)

A heavy duty general purpose angle plate manufactured from 2.0mm thick galvanised steel to BS EN 10346 +G275 in anthracite grey.

PP Pallet Plates

A multi-purpose galvanised plate manufactured from 1mm steel, used to connect timbers without the use of nails. This product must not be used to fabricate roof trusses.

SPA Sole Plate Anchor

Designed for use as anchorage of timber sole plate to concrete base, but may also be used as a frame tie for fixing timber window frames. Manufactured from 0.9mm thick galvanised steel.

SP Splice Plate

An economical on-site method of butt jointing timbers of similar section. Suitable for use when replacing rotten floor joist ends, replacement of fire damaged timbers and repairing localised structural timber damage. Manufactured from 0.9mm thick steel. Must be fixed in sets of 4 per joint, minimum timber thickness 50mm.

SPL Safeplate (PP)

Secured to timber studding by use of pre-punched spikes, to protect plumbing and electrical wiring against random nailing. Unique integral metal teeth press into timber. No nails required.

MFS Multi-Fix Strapping (GFB)

An inexpensive perforated strip which can easily be cut or bent to provide a quick and reliable method of bracing roof trusses / diagonal strutting to floor joists / holding down wallplates / suspending pipework and cables / general repairs to fencing and many other DIY jobs. Manufactured from 0.9mm thick galvanised steel.

UA Universal Angle

These non-structural products provide an economical method for connecting two pieces of wood in non-structural applications.

GC-UA Universal Angle (Anthracite Grey)

These non-structural products provide an economical method for connecting two pieces of wood in non-structural applications.

SHER/ST Sheradised Square Twisted Nails (Nails)

Sheradised square twisted nails to BS 1202 Part1 are supplied in either bulk boxes of 25kg or polybags of 2.5 kg and 1.25 kg, approximate contents as detailed below.

SS/ARS Stainless Steel Annular Ring Shank Nails

Stainless steel nails to BS1202 Part1 are supplied in polybags of 100 and 250 pieces.

DSTC / SSTC Tooth Plate Connectors

For all applications to enhance bolt performance by reducing timber rotation and joint movement. Place between timbers on an M12 bolt prior to tightening.

SPW Square Plate Washers

For use with Timber Connectors above to reinforce timber on either side when tightening with bolts.

FLASHKIT Lead Flashing Kit

The lead flashing kit is designed to secure lead into brickwork before filling the mortar joint. The clip is inserted short end first, using the provided tool.

AS Aluminium Roof Soaker

Aluminium Roof Soakers, designed to protect against weather at the point where a roof meets a vertical face, such as a wall or chimney.

SHI Hip Iron (HIP)

A steel retaining bracket with decorative scroll design, used with traditional hipped roofs to prevent ridge tile movement. Screw or nail fix to rafter and embed in mortar.

WBFS Window Board Fixing Straps

WBFS is a thin profile engineered window board strap used to attach timber window boards to the internal face of a masonry wall and many other non structural general fixing applications.

UFS Universal Fixing Strap

Universal fixing strap is a reinforced 1mm galvanised strap suitable for many DIY and other non structural general fixing applications.

WBT Window Board Tie

A pre-galvanised bracket designed to attach window boards to masonry wall. Manufactured from 13 x 3mm galvanised steel to BS EN 10346:2009 + G275.

GWB Galvanised Weather Bar

Multi-purpose flat bar made from strong galvanised steel

AB40 Heavy Duty Angle Brackets

Suitable for timber to timber, timber to masonry and timber to steel applications. Manufactured from heavy duty 3mm thick galvanised steel, these 40mm wide brackets and plates provide a strong connection allowing for the use of bolts, nails, screws and coach screws.

Metalwork

Explore our range of Metalwork

Request Quote